Reddy Kancharla on the Careers of Geotechnical Engineers

What Do Geotechnical Engineers Do? Reddy Kancharla Explains

geotill.com

According to Reddy Kancharla, everything built on the ground requires the expertise of a geotechnical engineer. These professionals are there to ensure the stability of structures and to make sure everything built can withstand external forces.

In this blog post, Reddy Kancharla explains the importance of geotechnical engineering and the various responsibilities of a geotechnical engineer.

Preliminary Assessments

First, geotechnical engineers conduct preliminary investigations. This includes an assessment of the ground and the environment. A geotechnical investigation has to be conducted even before the structure is designed.

Reddy Kancharla explains that there are several aspects to evaluating geotechnical properties, including the exploration of both the surface and the subsurface. Water content and soil properties are measured and analyzed as well.

The investigation can involve a simple physical observation of the site. It can also involve a battery of tests. These tests include penetration tests and soil sampling. Examples of more in-depth tests are Atterberg limit tests, water content measurement, grain size analysis, and more.

handymantips.org

Designing the Project's Foundation

Next, geotechnical engineers also do foundation design. The design of the foundation, its depth, and its type depend on the planned structure and a number of ground properties.

For example, geotechnical engineers take into consideration the bearing capacity. This is the ability of the ground to fully support the load of the structure. They also look at settlement, which refers to the tendency of the soil to move downward due to the vertical strain the structure imposes on the ground.

Determining Ground Movement

Finally, Reddy Kancharla says that geotechnical engineers look at ground movement. Ground movement pertains to the movement underneath the structure caused by climatic changes, a shift in temperature, slope instability, and others.

Reddy Kancharla has been involved in the civil engineering and construction industry, geotechnical consultation, and construction quality assurance. Learn more about the Osmania University alumnus by visiting this page.

Construction Trends to Watch Out for in 2023

roboticsbiz.com

The construction industry continues to change every year. Some of the changes are small in scale, while some have vast and long-lasting effects in the sector. The following year, you can expect even more changes and innovations in the field, says Reddy Kancharla. Some trends to watch out for in 2023 are the following.

Increased Digitization

Technology plays a huge role in construction, allowing projects and processes to be more efficient regarding energy, labor, and finances. Digitization is anticipated to progress even more in the industry in the following years, starting in 2023. Some examples of digitization that will likely occur are the automation of tasks and the increased use of artificial intelligence and robotics. The advancement will also certainly make a significant impact on the health and safety of workers.

Building Pricing Software

Construction typically involves massive amounts of money, and there are times when human-factor errors can mar the estimation processes. Building pricing software can address these issues by employing ready-to-use algorithms for various processes, such as budget planning, bidding, and smart predictions. According to Reddy Kancharla, this tool can even help raise the levels of communication between departments because pricing processes can be moved to a digital and remote-friendly channel.

designingbuildings.co.uk

Rising Interest in Rented Machinery

It is widely known in the industry that most construction types of machinery are very pricey. On top of that, more technologically advanced pieces of equipment are developed and released in the market every now and then. For these reasons, there has been an uptick in preferences for renting construction equipment recently. In addition, some construction firms might also favor buying used machinery instead of new ones.

Takeover of Fabric Buildings

Fabric buildings are tensile structures erected with “stretched” membranes used for roofs, shadings, or decorative parts of a building. It is predicted that fabric buildings will significantly rise in 2023 because they are less costly to create and can build on a company’s green footprint.

Do you see these trends coming to fruition in 2023? Let’s discuss this in the comments. If you want to stay updated on the construction industry, subscribe to this Reddy Kancharla blog.

Reddy Kancharla Shares Top Tips to Control Dust in Your Home

www.pexels.com

Mold, pollen, bacteria, chemical byproducts, smoke, hair, dander, insects, and more could all be present in the dust in your air ducts. As a result, your family can suffer from allergies or develop asthma. In this post, Reddy Kancharla offers top tips to control dust in your house and make it a healthier home.

 

1.      Make good use of air filters.

Reddy Kancharla explains that many benefits come from properly installed filters that remove impurities from the air in your home. For one, your HVAC system won't have to work as hard to create and distribute clean air, reducing energy costs. It will also help reduce allergy symptoms like itchy eyes, coughing, and breathing difficulties brought on by uninvited particles.

 

2.      Invest in a whole-house vacuum.

Although most manual vacuums don't capture extremely fine particles, Reddy Kancharla recommends getting a high-quality vacuum because vacuuming helps control dust. These tools will send small particles — which can often cause allergies and asthma — outside.

 

3.      Check your air conditioner's condensation pan.

Reddy Kancharla suggests inspecting the condensation pan on your air conditioner's cooling coil to ensure it properly drains. While you're there, double-check that you properly seal all non-airconditioned spaces in your home, like unused rooms, the attic, and the basement.

 

4.      Avoid moisture.

Air ducts and moisture don't mix well. A few summer showers can cause the air ducts in your home to become moist, leading to mold growth. Given this, Reddy Kancharla recommends contacting a specialist immediately to prevent moisture from entering because it could cause significant health issues. They should look for leaks, make repairs, and redo shoddy installations.

 

5.      Maintain ductwork safety when remodeling.

During any renovations that will produce sawdust or other particles, Reddy Kancharla suggests blocking registers and vents. Use a thick plastic cover secured to your vents with medium-adhesion painter's tape if you don't want to close them. Doing so will lessen the chance of particles becoming trapped in your system.

 

6.      Avoid using dryer sheets or fabric softener on your cleaning materials.

Avoid using fabric softener or dryer sheets while washing microfiber cloths if you're an eco-conscious homeowner who prefers them to paper towels. These items will lessen the cloth's capacity to gather dust.

 

7.      Tidy up your house.

Reddy Kancharla believes performing a thorough inspection of your home is the simplest way to help prevent dirty ductwork. Be sure to remember the following tasks:

 

l  dusting the ceiling fans, shelves, and tables

l  vacuuming hardwood floors and carpets

l  cleaning rugs and drapes

l  cleaning the walls

l  mopping the floor

Reddy Kancharla Shares Tips to Improve Lighting in Your Home

 
Lighting is a rather practical aspect of a home in and of itself. You use it regularly without giving it much attention. However, Reddy Kancharla thinks there are numerous ways to improve the appearance and functionality of the lights. Many improvements are inexpensive and simple to apply. Try out any or all of these suggestions, and you might be amazed at how much of a difference a better lighting system can make.

 

Replace Your Light Bulbs with LEDs

Reddy Kancharla recommends using LEDs since they are far more energy-efficient than incandescent bulbs. One of the most significant advantages is saving energy and money on your electric bills. When choosing an LED light bulb, it is best to select those that you can dim. LEDs with adjustable color temperatures are also worth looking into since these features can dramatically affect the appearance of a room.

 

Consider Using Smart Light Bulbs

You can control a smart light bulb (which includes many LED bulbs) via an app on your phone. Reddy Kancharla recommends using them since they give you greater control over the lighting while also saving energy. So, instead of searching for a light switch on the wall as you enter your home, you may activate a smart bulb by tapping a button on a smartphone app as you pull into the driveway.

 

Consider Installing Dimmers

According to Lutron, dimming lights by 25% can save you 20% on electricity expenditures. Reddy Kancharla recommends knowing the bulb type and deciding on the dimmer wall plate's color and style to choose the proper dimmer. Some dimmers also include additional functionality, like automatically dimming the lights to your preferred level.

 

Install Motion Detectors

These basic devices, which you can mount on the ceiling or wall, perform what they say. They will turn the lights on when they detect motion and off when it stops. After vacating a room, you can usually select the sensitivity and wait time for the lights to turn off. Reddy Kancharla believes motion sensors are great for places like closets and bathrooms where lights are frequently left on by accident. For example, you may even add wireless to doors to turn the light on when the door opens.

Reddy Kancharla Shares Flooring Tips

Hardwood flooring is not only beautiful and practical, but it can also increase the market value of your home as long as it is in good condition. Dings, dents, and scratches can detract from their attractiveness and diminish their value. It is best to repair scratched hardwood floors before listing your home on the market, but you must know how to do it properly or risk making matters worse. Although it is generally best to hire a professional to repair significant scratches or deep, wide gouges, Reddy Kancharla shares a few beneficial basics that anyone can master below.

 

Scratches

Filling in scratches or sanding the wood floor down to eliminate any marks are two common methods for removing scratches. Reddy Kancharla suggests rubbing along the length of the scratch with the grain since rubbing against the grain can result in more scratches that you'll have to patch later. After sanding, rub the area with mineral spirits until the scratch is no longer visible and the wood is smooth.

 

Gouges or Deeper Scratches

Some scratches are more difficult to treat and demand considerable effort. Additional supplies will be necessary for deeper scratches or gouges on your hardwood floor. Allow around 24 hours for complete removal.

 

Dent Removal

You can eliminate most dents by combining heat and moisture to restore the original shape of the wood. Scars occur when a heavy object impacts the wood. Reddy Kancharla recommends examining the dent carefully to ensure that no wood has been lost from the damage. If you're certain there's no missing or splintered wood in the dent, you can start heating it to swell it back into place.

 

Keeping Your Hardwood Floor in Good Shape

1.    Vacuum, sweep, and dust your floors. Then, attach a hard floor adapter to your vacuum to avoid harming the finish of your wood.

2.    Reddy Kancharla recommends using the appropriate cloth when cleaning your floors. You must avoid scouring powders and abrasive cleaners to prevent further damage.

3.    Use the appropriate cleansers. The finish of your hardwood determines the best cleaning solution, not the wood itself. Oil-based wax, polish, or strong ammoniated treatments might dull the finish of your floor.

Immediately wipe up any spilled water. You should dry any standing water as quickly as possible since water can destroy even surface-treated hardwood.

 

Reddy Kancharla: How to Deal with Molds in Your Home

unsplash.com

Molds are microorganisms that can propagate almost anywhere given the right conditions. Mold can take the form of hairy growths, black spots, or particles of black, white, orange, green, or brown. Mold proliferates on wet surfaces inside your home, such as bathroom walls and window trim. Reddy Kancharla advises addressing mold-related issues expediently to avoid the many negative repercussions they can bring.

 

Possible Causes

Mold is more likely to grow in a home with more people living in it because of the amount of moisture released from breathing. Reddy Kancharla explains that storing damp firewood, using too much water on plants, and storing too many vegetables like potatoes and squash can further exacerbate mold proliferation.

 

Preventing Mold Growth:

Inside the house:

·      Lessen moisture in the air using dehumidifiers and air conditioners, especially in hot, humid conditions.

·      Keep the interior humidity below 60%. A hygrometer can be used to measure relative humidity.

·      Clean the air conditioner drip pans. Ensure that the drainpipes are clear and flowing correctly.

·      Reduce condensation by adding insulation to cold surfaces such outside walls, floors, and windows.

·      To avoid mold growth, dry damp surfaces within 24 to 48 hours.

·      Have a heating and conditioning contractor inspect your system to ensure it is appropriately sized and running to eliminate humidity. Request that the contractor inspects your duct system for air leaks and proper airflow to each room.

·      Increase circulation by opening doors between your rooms, which will carry heat to cold surfaces. In addition, you can use fans and move furniture away from wall corners to improve air circulation.

 

In the kitchen:

·      When cooking, dishwashing, or cleaning, use exhaust fans to transport moisture outside.

·      Examine the kitchen sink, refrigerator ice makers, and other water sources for leaks. If required, make repairs.

·      Empty and clean the refrigerator drip pans regularly.

Reddy Kancharla Explains How to Identify and Avoid Construction Deficiencies

Construction defects are common, but the majority of them are minor and insignificant. On the other hand, Reddy Kancharla notes that the most dangerous flaws could endanger people or property. Whether a defect is major or minor, the problem remains: defects are typically not discoverable until long after you complete the work, and defending against defect claims is a complicated (and expensive) task.

 

What Are Common Types of Construction Defects?

Defects in the Design

These flaws result from a design professional's failure to create accurate and well-organized construction documents. Design flaws occur as a result of an error or omission. Errors usually necessitate a redesign and replacement of a part, whereas omissions can be corrected by expanding a contractor's scope of work via change orders.

 

Defects in the Material

"Material defects" occur due to faulty or insufficient building materials. When the manufacturer causes these defects, the parties who use the materials usually don't know the flaw until the materials are incorporated into the project. As a result, material defects are exceptionally costly because they may necessitate additional labor and new materials.

 

Defects in Craftsmanship

When most people think of construction defects, they think of craftsmanship flaws. When a contractor fails to build a structure according to the construction documents, this results in a deficiency.

 

How to Reduce Construction Defects and Their Effects

Everyone involved in a construction project is responsible for reducing construction defects. Everyone can take preventative measures to reduce their chances of encountering one.

 

Construction defects can quickly derail a project, and with so many people involved, they're not always easy to spot or manage. To avoid deficiencies, Reddy Kancharla believes everyone involved in a project–from the design team to the construction team–must do their part. Quality control programs, communication, and documentation are simple but effective ways to reduce defective work, benefiting your bottom line and reputation.

Reddy Kancharla Shares Tips On What To Do After Detecting A Leak

 

A small leak in a commercial building can cause extensive water damage. The longer the leak goes unnoticed, the more significant damage. As Reddy Kancharla points out, commercial spaces use more water than residential properties, so it is best to act quickly after detecting a leak.

 

Roof Water Leaks

Roof leaks are common in buildings with flat roofing and a faulty drainage system is usually to blame. Property owners should seek commercial roof repairs if the drainage system fails to reroute the standing water.

 

Roofing membranes can split, blister, crack, or shrink as roofs age. Minor damage to the roofing membrane, if discovered in time, will require only a roof repair rather than a highly costly roof replacement.

 

Gas lines, HVAC units, vents, drains, and pipes all pass through rooftops, necessitating proper securing to avoid leaks inside the commercial property. Reddy Kancharla recommends regularly monitoring each roof penetration to ensure a watertight seal. Rain collars, flashing, pipe boots, and field wraps are effective leak-prevention measures.

 

Plumbing Errors

Reddy Kancharla also believes that property managers should look for the first signs of plumbing pipe leaks. Underground plumbing bursts result in spongy, unstable flooring and constantly wet soil. You can identify pipe leaks behind walls by crumbling plaster, bulging walls, visible water stains, and loose tiles.

 

Additionally, Reddy Kancharla believes it is best to suspect water leaks in the presence of lingering, musty odors, visible mold growth, and noticeable increases in the water bill. Fortunately, water leak sensors can detect hidden water leaks like these. Once you identify the leak, Reddy Kancharla suggests removing the flooring to access the pipes for repair or digging up the soil to reach the underground pipes.

 

Leaks in Commercial Basements

Cracked foundations can cause water leaks in commercial basements. However, these are likely to go undetected until the minor leak erupts into a massive, unexpected water issue in the form of floods and structural damage. As a result, once the basement has sprung a leak, it cannot be fixed with band-aid solutions such as crack plugging. So, Reddy Kancharla recommends contacting a professional waterproofing contractor to determine the exact source of the leak and resolve the problem.

Reddy Kancharla Explains How to Identify and Avoid Construction Deficiencies

Construction defects are common, but the majority of them are minor and insignificant. On the other hand, Reddy Kancharla notes that the most dangerous flaws could endanger people or property. Whether a defect is major or minor, the problem remains: defects are typically not discoverable until long after you complete the work, and defending against defect claims is a complicated (and expensive) task.

What Are Common Types of Construction Defects?

Defects in the Design

These flaws result from a design professional's failure to create accurate and well-organized construction documents. Design flaws occur as a result of an error or omission. Errors usually necessitate a redesign and replacement of a part, whereas omissions can be corrected by expanding a contractor's scope of work via change orders.

Defects in the Material

"Material defects" occur due to faulty or insufficient building materials. When the manufacturer causes these defects, the parties who use the materials usually don't know the flaw until the materials are incorporated into the project. As a result, material defects are exceptionally costly because they may necessitate additional labor and new materials.

 

Defects in Craftsmanship

When most people think of construction defects, they think of craftsmanship flaws. When a contractor fails to build a structure according to the construction documents, this results in a deficiency.

 

How to Reduce Construction Defects and Their Effects

Everyone involved in a construction project is responsible for reducing construction defects. Everyone can take preventative measures to reduce their chances of encountering one.

 

Construction defects can quickly derail a project, and with so many people involved, they're not always easy to spot or manage. To avoid deficiencies, Reddy Kancharla believes everyone involved in a project–from the design team to the construction team–must do their part. Quality control programs, communication, and documentation are simple but effective ways to reduce defective work, benefiting your bottom line and reputation.

Reddy Kancharla: How to Deal with Poor Insulation

www.pexels.com

Poor insulation is often an expensive problem with inexpensive solutions. If not properly insulated, you may discover that a minor leak has become a hazard, accompanied by skyrocketing utility bills. Reddy Kancharla believes that the more severe insulation issues, the more likely you are to need the assistance of one or more professionals to repair them. However, if you check the insulation early, the solution may be cheap or free.

Industrial and commercial buildings are especially vulnerable to insulation issues. Because energy consumption in these centers is already high, Reddy Kancharla thinks business owners should not waste resources on a high utility bill caused by a building with poor insulation. In addition, the problems may cause the building to be out of commission for the duration of repairs and endanger worker safety. Here are some signs of poor insulation to look out for and tips on dealing with issues.

Your walls are ice cold.

If you suspect you have insulation problems, the first thing you can do is try to fix it for free. For example, you can use the touch test, wherein you touch the walls as you walk around your house. If you notice that your walls are much colder to the touch than the room temperature, or if they feel damp, you suspect a problem with the insulation.

However, because it is only the first sign of insulation problems, you should first rule out any unnecessary changes or upgrades. Therefore, Reddy Kancharla recommends checking if any more severe symptoms of a problem accompany your cold walls.

Exterior wall abrasions

Hailstorms, accidents, and anomalies can all cause damage to your building envelope (the entire exterior walls), and Reddy Kancharla suggests fixing it as soon as possible.

For holes smaller than nail heads or cracks less than 14 inches wide, spackling paste from your local hardware store can help repair them quickly, efficiently, and cheaply. If the building has vinyl siding and the hole is slightly larger, spackling a patch of spare siding over the fissure can be helpful. 

Reddy Kancharla: Is Soil Investigation Essential for Your Building Project?

 But, Reddy Kancharla believes it all starts with the foundation, whether you're building a house or a commercial structure. Because the foundation is an essential part of the structure, it must be rock solid. Soil investigation allows you to plan your foundation work precisely. Before beginning your construction project, learn more about soil investigation and its significance in construction projects.

 

Soil Investigation

Soil investigation, or geotechnical investigation, is a technique for determining the physical properties of soil at a construction site. This procedure helps determine whether the ground is safe and solid enough for construction. A construction project cannot begin until soil samples are analyzed. Consequently, the findings of this below-ground investigation may impact the construction project's progress.

 

What Is The Significance

Many people overlook the significance of soil investigation, but it is a critical and necessary step in the construction process. Therefore, don't think that you don't have to go through the same method because the neighboring areas completed their buildings after conducting a geotechnical investigation. Soil characteristics can vary significantly depending on location, affecting the foundation's stability. In addition to this, other factors, such as weather, soil management, and climate change, can all impact soil properties and, as a result, the building.

 

This step in the construction process is critical because insufficient soil bearing capacity can lead to foundation failures. It can endanger the safety of those in the surrounding area. If the ground is unsuitable for a particular construction, it may collapse, endangering other people's homes and lives.

 

As previously stated, the findings of a soil investigation can have ramifications for the entire construction project. Engineers must adjust the depth and type of the foundation, decide on the necessary construction elements, select appropriate building techniques, and predict possible problems and solutions based on the bearing capacity of the soil, its properties, the rate of soil settlement, and other relevant data. Finally, soil investigation predicts stability regarding potential construction costs.

 

You'll be able to anticipate any potential problems and plan your finances accordingly if you conduct this type of investigation. Otherwise, you risk starting your building project and investing a lot of money only to discover that the soil isn't suitable.

Reddy Kancharla: Is Geotechnical Engineering An Ideal Career Option for You?

 Graduation season has arrived, and many new and aspiring civil engineers are considering their next steps in their careers. Geotechnical engineering may be a lesser-known subset of civil engineering, but it is in-demand, pays well, and supports nearly every civil engineering project. So, Reddy Kancharla wants to share more about it and why it might be an ideal career option for you. 

 

What Does a Geotechnical Engineer Do

Geotechnical engineers investigate subsurface geologic conditions using rock and soil mechanics. Reddy Kancharla believes these investigations are essential in designing structure foundations, earthen structures, and pavement subgrades. In addition, geotechnical engineers deal with geotechnical hazards and risks. If the building has support from soil or rock beneath, geotechnical engineers are in charge of devising practical solutions to ensure the project's safety and viability.

 

Geotechnical engineers investigate soil, rock, groundwater, and artificial materials with earth retention systems, structure foundations, and other civil engineering work. In addition, they conduct detailed soil investigations to help determine the soil’s ability to support a stable foundation. Reddy Kancharla believes every geotechnical engineer must learn about and understand ground hazards and risks and find practical solutions to these problems.

 

What Does This Career Require?

Reddy Kancharla believes geotechnical engineers, like all engineers, must be excellent communicators in their daily work. A significant portion of the job entails writing clear, concise, and technically accurate reports. In addition, geotechnical engineers must write about site characterizations, their implications for design, and other analyses they conduct in a way that non-technical readers can comprehend.

 

Geotechnical engineers must work outside in various environmental and weather conditions. Therefore, they usually divide their time between working on-site and in offices. Geotechnical engineers must also be proficient with computers, as using specialized geotechnical software programs and databases is a vital part of their job.

 

If you think all these factors are ideal for you, Reddy Kancharla strongly advises you to pursue a meaningful and rewarding career in geotechnical engineering.

Reddy Kancharla on The Importance of Construction Safety

Reddy Kancharla believes that the construction business has the most hazardous working conditions. Employees face health risks when doing dangerous duties and risky maneuvers, which may not always end well. An accident on a construction site can cause various problems, ranging from minor injuries to life-long physical damage or even death.

 

When construction accidents occur in a public area, the harm can be far-reaching, with pedestrians and motorists becoming victims. It is why Reddy Kancharla believes that one of the most critical considerations you should make before beginning any building job is safety. So, before you set foot on a construction site, make sure to consider all aspects of safety hazards and preemptive efforts to prevent them.

 

Generally, you should consider two things to help you avoid incidents from happening:

 

Training

Reddy Kancharla believes that injuries and other mishaps occur on construction sites because workers do not have adequate training before working on a project. Practical training helps ensure that your personnel is aware of the hazards on the job place.

 

Tools

The correct safety tools can also make a significant impact in the workplace and help to avoid unnecessary accidents. Fall arrest harnesses and safety clothes, for example, can help to limit occupational dangers.

 

Reddy Kacharla believes not only is health and safety crucial for avoiding injury, but there are numerous other long-term benefits that your company stands to receive. For example, your staff will be happier in doing their jobs if they are confident in their safety and security at the construction site. Also, if your team has the proper knowledge and tools, it can improve morale on the job site and contribute to increased production.

 

You can gain more productive working hours with fewer illnesses and injuries, leading to higher profits. Also, you can develop a positive reputation for your company in the long run, which will help you keep employees.

Reddy Kancharla Shares Quality Control Tips for Construction Projects

Reddy Kancharla believes that construction quality is critical to expanding your business, keeping a professional reputation, and remaining profitable. However, not everyone can maintain control over the quality of their initiatives. For example, most contractors and tradespeople are naturally proud of their work. But, they also understand that things rarely go as they plan, especially for huge or complex projects. The building sector is volatile, and some things are unpredictable.

 

That is where a quality control process may help, and no quality control approach is complete without the appropriate checklists. As your company grows, Reddy Kancharla believes it will become even more critical to have a consistent quality assurance process to ensure that all projects, large or small, are of the same high quality.

 

How to Control Construction Quality

1. Begin with the Right Employees

It is no secret that the building and trades industries suffer from a workforce shortage. So when you begin your project, Reddy Kancharla believes it is critical to ensure your teams have competent individuals. Additionally, it is best to assign the appropriate individuals to the suitable jobs and make sure your supervisors or forepersons understand the quality requirements.

 

2. Invest in technology.

For Reddy Kancharla, the most crucial thing is to invest in technology that provides five-star customer care so that you are not left hanging when you have queries or require assistance. But, Using technology does not have to be a whole revamp of your procedures. Instead, you may start with a simple time-tracking solution that streamlines payroll and scheduling. Then, progressively expand to incorporate task administration, GPS tracking, and reporting.

 

3. Use the Proper Materials

Reddy Kancharla believes it is best to check that all materials used in the structures and buildings meet the quality standards and project specifications. Also, ensure that you order supplies that meet the required criteria. Additionally, you should reject damaged or incorrect things and notify the supplier promptly, then clearly identify non-compliant items so workers do not use them unintentionally.

Reddy Kancharla Explains Remedial Works in Construction

 Reddy Kancharla believes that defects are a significant source of disagreements on building projects. Often, the first reaction is to assign blame and seek swift reparation. However, it is prudent to take the time to correctly identify the origin of the fault and determine corrective activities. Reddy says to weigh the consequences of the delay and expense of remediation against the impact of the defect.

 

Reddy Kancharla believes experts must investigate the fault and appropriate corrective steps. The client may prefer to seek an alternative, negotiated solution rather than seek restitution.

 

The client may wish to recover the total cost of work needed due to the defaulting party (e.g., breach of contract or carelessness), thus raising questions of what is recoverable.

 

You might think that this would be a simple matter. But, Reddy Kancharla believes the situation is a little more complicated, as it always is in law.

 

Experience taught Reddy Kancharla that there is no sure-fire way to recoup all of the costs of remedial work. However, adopting modest actions should help with a successful recovery. So, when deciding what remedial work to perform, you should consider the following:

1. Obtain advice from an impartial expert on the sources of the faults and the best repair remedy.
2. If the proposed corrective works are incredibly costly or significant, you may seek a second expert opinion on which works to carry out. If both experts' judgments agree, the defaulting party will find it difficult to oppose your conclusion.
3. Consider the experts' advice from a practical and commercial standpoint.
4. Inform the defaulting party promptly about the remedial actions you intend to take and the reasons for them.
5. Allow the defaulting party and its experts to investigate the faults before the corrective activities begin. Otherwise, you are removing the evidence of defects before the defaulting party has a chance to inspect them.